Millimeters to Fractional Inches
Convert Millimeters to Fractional Inches
"Millimeters to Fractional Inches" Calculator
How to convert millimeters to fractional inches
Divide by 25.4 for decimal inches, multiply by 64 (by 16 for a tape measure), round to a whole number and reduce the fraction.
37 ÷ 25.4 ≈ 1.4567″; 37 ÷ 25.4 × 64 ≈ 93.2283 → 93/64″ = 1 29/64″
| mm | 1/64″ | 1/16″ | Decimal |
|---|---|---|---|
| 5.5 | 7/32″ | 3/16″ | ≈ 0.2165″ |
| 9.5 | 3/8″ | 3/8″ | ≈ 0.374″ |
| 12.7 | 1/2″ | 1/2″ | 0.5″ |
| 34 | 1 11/32″ | 1 5/16″ | ≈ 1.3386″ |
| 36 | 1 27/64″ | 1 7/16″ | ≈ 1.4173″ |
| 37 | 1 29/64″ | 1 7/16″ | ≈ 1.4567″ |
| 38 | 1 1/2″ | 1 1/2″ | ≈ 1.4961″ |
| 42 | 1 21/32″ | 1 5/8″ | ≈ 1.6535″ |
| 44 | 1 47/64″ | 1 3/4″ | ≈ 1.7323″ |
| 54 | 2 1/8″ | 2 1/8″ | ≈ 2.126″ |
| 55 | 2 11/64″ | 2 3/16″ | ≈ 2.1654″ |
| 63 | 2 31/64″ | 2 1/2″ | ≈ 2.4803″ |
See Also
- Inches to Meters - Convert Inches to Meters
- Inches to Millimeters - Convert Inches to Millimeters
- Meters to Inches - Convert Meters to Inches
- Millimeters to Inches - Convert Millimeters to Inches
- Inches to Centimeters - Convert Inches to Centimeters
- Centimeters to Inches - Convert Centimeters to Inches
- Fractional Inches to Millimeters - Convert Fractional Inches to Millimeters
- Mm to Cm - Convert Millimeters to Centimeters
- Cm to Mm - Convert Centimeters to Millimeters
- Cm to M - Convert Centimeters to Meters
- M to Cm - Convert Meters to Centimeters
FAQ
How do I convert millimeters to fractional inches?
Divide the millimeter value by 25.4 to get decimal inches, then round to the nearest SAE fraction (denominator of 2, 4, 8, 16, 32, or 64). For example, 20.6375 mm ÷ 25.4 = 0.8125″, which is exactly 13/16″.
What are SAE fractional inches?
SAE fractions are standard inch sizes whose denominators are powers of two: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64. They are used for American wrenches, drill bits, and fasteners.
How accurate is a mm to fractional inch conversion?
The result is rounded to the nearest 1/64″ (about 0.4 mm), so the fraction is an approximation. The calculator also shows the decimal inch value, rounded to 0.0001″, so you can judge the rounding error.