Concrete Calculator
Slab size to cubic yards, bags and weight
Concrete Calculator
Concrete: the Formula, the Bags and What a Yard Weighs
Example: a 10 × 10 feet slab, 4 inches thick
Plan volume of a slab of even thickness, before waste · rounded. Weight, approximate: fresh concrete, about 3,780 lbs per cubic yard.
10 × 10 feet = 100 square feet; 100 square feet × 4 inches ÷ 324 ≈ 1.23 cubic yards
- Bags of 80 lbs dry mix, rounded up
- 56 bags
- Ready mix, with 10% extra
- 1.36 cubic yards
- In cubic feet
- 33.33 cubic feet
- Weight, US short tons of 2,000 lbs
- 4,649 lbs (2.32 tons)
Density behind the weight: about 3,780 lbs per cubic yard — approximate nominal of fresh normal-weight QUIKRETE mix, not of every concrete.
How thick to pour
Thickness is an input on this page, and every value gets its own answer. Here is what 10 × 10 feet takes at each of the usual thicknesses:
| Thickness | One cubic yard covers | Concrete for 10 × 10 feet |
|---|---|---|
| 3 inthin pad on firm, well drained ground | 108 sq ft | 0.93 cu yd |
| 4 infootpath, patio, shed floor | 81 sq ft | 1.23 cu yd |
| 5 indriveway for a car, garage floor | 64.8 sq ft | 1.54 cu yd |
| 6 indriveway with vehicles, machinery pad | 54 sq ft | 1.85 cu yd |
| 8 inheavy pad, thickened edge, footing | 40.5 sq ft | 2.47 cu yd |
A strip foundation on this form
A strip footing is not a rectangle, but it is a rectangle unrolled: a long, narrow band. Feed the form the width of the strip as one side and the length of its run as the other, and put the height of the strip in the thickness field.
So the form takes 1 × 116 feet at 8 inches, which is 116 square feet and 2.86 cubic yards of concrete — 129 bags of 80 lbs, or 3.16 cubic yards ordered ready mixed. The same trick works for a path, a kerb or a beam: anything long and narrow is a band.
Bags or a mixer
Bagged dry mix and ready mixed concrete are two ways to buy the same volume, and the honest comparison is made at the same volume. A bag of QUIKRETE Concrete Mix yields this much of mixed concrete:
| Bag | Yield | Bags per cubic yard |
|---|---|---|
| 40 lbs | 0.3 cubic feet | 90 |
| 50 lbs | 0.375 cubic feet | 72 |
| 60 lbs | 0.45 cubic feet | 60 |
| 80 lbs | 0.6 cubic feet | 45 |
| 90 lbs | 0.675 cubic feet | 40 |
The numbers come from the QUIKRETE Concrete Mix data sheet (Product No. 1101, revised October 2022), section YIELD; this page calculates with the 80 lbs bag, the common US size.
What a cubic yard of concrete weighs
One number, and the source gives exactly one: 140 lbs per cubic foot, measured to ASTM C138 — QUIKRETE Concrete Mix data sheet, Table 1, «Typical Physical Properties». A cubic yard is 27 cubic feet, so that is 3,780 lbs per cubic yard. A 10 × 10 feet slab 4 inches thick therefore weighs 4,649 lbs.
Strength: the grade does not change the volume
Nothing on this page depends on the strength you order — a stronger mix fills the same forms. It does decide what the slab may carry, so here is the usual reading of the numbers:
| Strength | Where it goes |
|---|---|
| 2,500 psi (17 MPa) | non-structural fill, blinding, mud slabs |
| 3,000 psi (21 MPa) | footings and foundation walls in mild exposure |
| 3,500 psi (24 MPa) | interior slabs, basement floors, shed bases |
| 4,000 psi (28 MPa) | driveways, garage slabs, exterior flatwork in freeze–thaw |
| 4,500–5,000 psi (31–35 MPa) | heavy-duty pavement and structural work |
Where this stops being the right calculator
- The slab must be flat and rectangular. Split an L-shape into rectangles and add them; for a circle use π × radius² and enter the result as one side against a width of 1.
- This calculator does not design the slab. Thickness, reinforcement, sub-base and control joints are decided by the load and the ground, and no volume calculator answers that.
- Footings, columns and steps are separate pours. Each has its own dimensions; add the volumes, do not average the thicknesses.
- Measuring the area first? That is a different question and it has its own page — square footage of 10 × 10 feet answers «how many square feet», this page answers «how many cubic yards, bags and pounds».
- The weight is a nominal. It comes from one packaged product; a different mix design lands near it, not on it.
See Also
- Gravel Calculator - Area to cubic yards, tons and coverage
- Mulch Calculator - Area to cubic yards, bags and coverage
- Topsoil Calculator - Cubic yards, weight and coverage for any area
- Sand Calculator - Cubic yards, tons and coverage for any area
- Square Footage Calculator - Width × length in feet to square feet